Congratulations on your Troy Lee Designs Premium Protective gear purchase.
Please take a few minutes to read the following information before using your
protective gear.
WARNING!
Troy Lee Designs warranties all its products against defects in materials and
workmanship for one year. Normal wear and tear, negligence, or improper
care during the use of a product is not considered a defect. No warranty or
representation is made as to this product’s ability to protect user from any injury or
death. The user assumes that risk. Protective Gear is built to assist in absorption
of light impacts. It must be replaced after serious impact and should not be used if
there are any cracks or broken plastic or torn material. Protective gear is intended
to minimize injuries, but it does not guarantee complete protection against injury
or death. Do not modify this protective product in any way as it would dangerously
reduce its intended performance. This product conforms to EN standards only in
the configuration originally sold by the manufacturer. Troy Lee Designs does not
offer any warranty or representation of this product’s ability to protect the user
if pieces are removed. Only the pieces in original positions conform to the EN
standard. Only official TLD replacement parts are recommended.
NOTE:
The life expectancy for protective gear is two years from date of purchase
without incident of impact. Do not place gear in high heat and extreme cold
conditions. This will damage the product.
SIZES:
Rogue Knee: S/M, L/XL - Rogue Elbow: S/M, L/XL
FITTING KNEE GUARDS:
Take measurements 5 cm above the knee CENTER for
Thigh measurement. Measurements should fall into one of the following size
categories:
The protector should not be loose in any area. The kneepad foam padding shall be
placed directly over the kneecap and securely in place before use.
EN
KNEE GUARDS
S / M
L / XL
LOWER THIGH CIRCUMFERENCE
31 - 40 cm
40 - 45 cm
*Measurement Instructions: Measure 5 cm above center knee cap
