Screw
Spring Washer
4
Washer(3x6mm)
Screw (3x25mm)
4
Assemble the servo of elevator to the servo mount.
Fix the stabilizers to the tail fuselage via screws.
Nut
Washer 2x5mm
Screw 2x10mm
Collar
Install the control horn and connect the linkage.
Epoxy the control horn to the slots in the elevator,assemble the
elevator servo to the fuselage as illustration.
TP Screw (2.3x12mm)
4
Washer(2x5mm)
Screw (2x10mm)
4
Collar (3mm)
3
1
1
Tail landing gear 3mm
Tail wheel (45mm)
Aluminium plate
Accessory list for the coming installation steps.
Install the tail landing gear.
4
3
Clevis
4
Copper joiner
4
Aluminum tube
2
2
1
Steel wire (0.5x3000mm)
Collar
Collar
Collar
aluminium plate
TP Screw (2.3x12mm)
Control horn
Pivot&round hinge(4.5X67mm)
3
4
Nut (2mm )
22
21
23
24
5
25
Install the engine mount tubes to the fuselage,lock them
from inside of the fuselage.
Assemble the engine to the fuselage via the engine
mount tubes and screws.
4
Washer(4x8mm)
4
Screw (4x45mm)
Washer(4x8mm)
Screw (4x45mm)
Screw (4x20mm)
Washer(4x8mm)
4
Washer(4x8mm)
4
Screw (4x20mm)
Set Screw (3x4mm)
Set Screw (2mm)
Rod (2x400mm)
Set Screw (2mm)
Washer (2mm)
Linkage Stopper
1
1
1
1
1
4
4
Washer (4x8mm)
4
Rod (2x400mm)
Blind Nut (5mm)
Screw (4x25mm)
Set Screw (3x4mm)
Assemble the throttle linkage.
Drill four holes at the diameters as shown for engine
mount.
162mm
4.2mm
The front view once the engine install completion.
The side view once the engine install completion.
39
42
40
41
8
37
38
