Make sure to glue securely.
If not properly glued, a failure in flight may occur.
Temporarily fasten down the main wing and
check its correct position.
Securely glue together.If coming off during flights,
you'll lose control of your airplane which leads
to accidents!
A
A ’
A = A '
B = B '
B
B ’
TP Screw (2.3x12mm)
1.5mm
Install the control horn and connect the linkage.
3mm
According to the rib template drill holes to the wing root
and epoxy wood dowel in them.
Assemble the wings to the fuselage through the main
wing joiner carefully.
1
Main wing joiner (25x875mm)
Main wing joiner (25x850mm)
Nut
Clevis
Washer 3x8mm
Screw 3x15mm
Collar
The standard sketch map when the kit install completion.
Secure the flap servo, install the control horn and connect
the linkage.
1
Main wing joiner (25x875mm)
2
Washer (6x15mm)
2
Screw (6x35mm)
12
14
13
11
15
3
Accessory list for the coming installation steps.
6
TP Screw ( 2.3x8mm)
2
2
Blind Nut (5mm)
Main landing gear
Washer (3x8mm)
8
6
Screw (3x15mm)
5
Screw (4x15mm)
2
Screw (5x35mm)
2
Wheel (115 mm)
2
Washer (5x12mm)
4
Washer (4x12mm)
5
2
Nut(5mm)
LockNut (5mm)
PVC
2
PVC
2
2
Accessory list for the coming installation steps.
Drill holes to appropriate position in the wheel pants,
fixing the wheel pants to the landing gear with screws.
Trim the PVC parts along the shaded line.
Assemble the landing gears to the fuselage with screws
as illustration.
Washer (5x12mm)
Washer (3x8mm)
Washer (5x12mm
Nut (5mm)
Screw (5x35mm)
Screw (3X25mm)
2
2
4
2
Washer (5x12mm)
Screw (5x35mm)
Nut (5mm)
2
Lock Nut (5mm)
Lock Nut (5mm)
The sketch map when the wheels and wheel
pants install completely.
Install the wheels to the undercarriage.
4.2mm
Blind Nut
1
Double-sided adhesive
Screw (3x25mm)
Screw (3x25mm)
Screw (4x15mm)
Washer (4x12mm)
5
Screw (4x15mm)
Washer (4x12mm)
5
Adjust to appropriate distance based
on the hole in the aluminum plate
of the landing gear
appropriate distance
1
Double-sided adhesive
50
51
52
53
10
49
