Assemble the retract to appropriate position in the wing.
1.5mm
TP Screw (2.6x14mm) 16
6mm
6mm
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
150mm
60mm
30mm
R10
Drill holes at appropriate position in the wing
for taking the air line and the servo line out.
Connect the wings with main wing joiner.
According to the rib template drill holes in one wing and
epoxy wood dowel in them.
According to the rib template drill holes to another
main wing.
Wood dowel (6x30mm)
Rib template (2mm ply)
2
Wood dowel (6x30mm)
1
1
Rib template (2mm ply)
Main wing joiner
Main wing joiner
Rib template (2mm ply)
Epoxy the wheel wells to the wings.
17
18
19
20
21
4
16
Wooden Block(43x28x26mm)
2
4
Collar (6mm)
Wheel (115mm)
Landing gear(6mm)
2
1
16
2
TP Screw (3x20mm )
Landing gear straps
12
Washer (3x6mm)
4
Wooden Block(25x15x13mm)
100mm
TP Screw (3x20mm)
Wooden Block
TP Screw (3x20mm)
Collar (6mm)
Wooden supporter
Collar (6mm)
Washer (3x6mm)
Assemble the wheel and gear door to landing gear.
1
PVC
2
PVC
1
Nose arm(3mm)
Collar (3mm)
3
1
1
Tail landing gear(3mm)
Tail wheel (45mm)
2
Steel wire (0.5x3000mm)
Epoxy the landing gear to the wing steadily.
6
TP Screw (2.3x8mm)
Ply (15x15x3mm)
6
Glue the exhaust to the fuselage as below.
Glue the small fairing parts to appropriate position
in the fuselage.
Clue the trimed bottom cover to the appropriate position on the
wing and drill holes in the rear cover for assembling the wings
easier when it needed.
69
70
68
71
67
13
Accessory list for the coming installation steps.
