TP Screw (3x20mm)
20mm
100mm
200mm
R10mm
R10mm
Air tube
Servo wire
1
Main wing joiner(25x620mm)
1
Main wing joiner(20x570mm)
Main wing joiner(25x620mm)
Main wing joiner(20x570mm)
TP Screw (3x20mm)
8
Rib template (2mm ply)
Rib template (2mm ply)
6mm
1
Wood dowel (6x50mm)
1
Rib template (2mm ply)
Wood dowel (6x50mm)
6mm
Assemble the retracts to the appropriate position
in the gear house.
According to the rib template drill a hole to one wing
root and epoxy wood dowel in it.
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Trim holes in the appropriate position in the wing
and drag the servo wire and the air tube out.
According to the rib template drill a hole in
the other wing root.
Connect the two wings with main wing joiners.
Trim the sheet carefully from the wing for assembling
the wheel well,epoxy the wheel well to it.
17
18
20
21
4
16
19
2
Steel wire (0.5x3000mm)
2.5mm
3
Pin hinge(2.5x48mm)
Make sure hinges are
mounted in the same line.
35mm
110mm
130mm
2.5mm
1mm
Wooden Block (9mm Ply)
Wooden Block (3mm Ply)
TP Screw(3x20mm)
Washer (3x6mm)
TP Screw(3x20mm)
Washer (3x6mm)
4
4
1
1
Wooden Block (9mm Ply)
Wooden Block (3mm Ply)
Wooden Block (9mm Ply)
Wooden Block (3mm Ply)
Tail gear cover
Be carefule don't let the arm touch
the fuselage when it works
Drill holes to appropriate position in the rudder and epoxy
the ping hinges in them
1mm
Rudder
Tailing
edge
Cut away the rubber tube when
the epoxy glue dried.
Make sure they are in
the right position while
installing.
Keep some space about 1mm width between
the tailing edge and the rudder.
Drill holes to the relevant position in the tailing edge
and epoxy the rudder to them.
Assemble the wheel mount to the thick wooden block
with screw,cut the surplus parts and epoxy the thinner
wooden block to it as illustration.
Connect the servo of rudder and the arm of tail
landing gear with steel wire.
Epoxy the the whole wheel mount set to the form in the
fuselage and be carefule don't let the arm touch the
fuselage when it works
44
43
45
46
47
9
48
Accessory list for the coming installation steps.
