250mm
The deconation can be removed
when unasemble the wings.
8
TP Screw (2.3x8mm)
Ply (15x15x3mm)
8
1.5mm
TP Screw (2.3x8mm)
TP Screw (2.3x8mm)
Epoxy plies inside the fuselage under the cowing and
mount the cowing with TP screw as illustration.
8
TP Screw (2.3x8mm)
Ply (15x15x3mm)
8
Deconation
1
48mm
2
Ply (2mm)
Ply (2mm)
Ply (2mm)
Epoxy plies to relevant position inside the fuselage as
below for assembling the cowling.
Epoxy plies inside the fuselage under the cowing and
mount the cowing with TP screw as illustration.
Epoxy the PVC decoration parts to the appropriate
position on the wing as illustration.
Disassemble the wing and set the ply to the slot
in the wing root.
Assemble the wings together,stick masking tape around
the ply and add some epoxy glue to top of the ply.
Assemble the air intake deconation to appropriate
position on the ply and wait until the glue dry.
Stick masking tape around
the ply to keep clear.
63
64
61
12
65
60
62
8
2
2
2
2
2
2
2
Clevis
Clevis
Rod (2.5x300mm)
TP Screw (2.3x12mm)
Wooden Block(20x20x8mm)
Servo tray(68.5x56.5x2mm)
Screw (4x40mm)
2
Washer
Lock Nut (4mm )
Securely glue together. If coming off during flights, you 'll
lose control of your airplane which leads to accidents!
Make sure hinges are
mounted in the same line.
8
Pin hinge(4.5x67mm)
8
Pin hinge(4.5x67mm)
1mm
Trailing
edge
Cut away the rubber tube when
the epoxy glue dried.
Make sure they are in
the right position while
installing.
Aileron
Rod (2.5x300mm)
Washer
Washer(4x14mm)
Lock Nut (4mm )
Clevis
Clevis
Nut (3mm )
Collar (3mm)
Screw (3x10mm)
Screw (4x40mm)
2
Washer(4x14mm)
2
Collar (3mm)
2
2
Screw (4x40mm)
2
Washer
Lock Nut (4mm )
2
Washer(4x14mm)
2
Clevis
2
Clevis
2
2
Screw (3x10mm)
Nut (3mm )
2
Collar (3mm)
2
Rod (2.5x300mm)
Install the servo as the illustration below
Install the nylon control horn and connect the linkage.
Apply instant AB glue to aileron and pin hinge.
Assemble the aileron to main wing with instant type AB glue. Be careful
to ensure the moving parts of the hinges are able to move freely.
Keep some space about 1mm width between the
trailing edge and the aileron.
1
2
3
4
5
1
Accessory list for the coming installation steps.
