Troy-Bilt TB25PS Скачать руководство пользователя страница 7

Страница: 7 / 56

• SAFETY & INTERNATIONAL SYMBOLS •

This operator's manual describes safety and international symbols and pictographs that may appear on this product. Read the operator's

manual for complete safety, assembly, operating and maintenance and repair information.

SYMBOL

MEANING

SYMBOL

MEANING

• SAFETY ALERT SYMBOL

Indicates danger, warning or caution. May be used in

conjunction with other symbols or pictographs.

• READ OPERATOR'S MANUAL

WARNING:

Read the operator’s

manual(s) and follow all warnings and safety

instructions. Failure to do so can result in serious

injury to the operator and/or bystanders.

• WEAR EYE AND HEARING PROTECTION

WARNING:

Thrown objects and loud

noise can cause severe eye injury and hearing loss.

Wear eye protection meeting current ANSI / ISEA

Z87.1 standards and ear protection when operating

this unit. Use a full face shield when needed.

• WEAR FOOT PROTECTION

Always wear heavy-duty, non-slip footwear when

operating this unit.

• WEAR HAND PROTECTION

Always wear heavy-duty, non-slip gloves when

handling this unit.

• HANDLE POSITION

Make sure the handle is positioned beyond the end of

the safety label.

• UNLEADED FUEL

Always use clean, fresh unleaded fuel.

• OIL

Refer to operator’s manual for the proper type of oil.

• DO NOT USE E85 FUEL IN THIS UNIT

CAUTION:

It has been proven that fuel

containing greater than 10% ethanol will likely

damage this engine and void the warranty.

• ON/OFF STOP CONTROL

ON / START / RUN

• ON/OFF STOP CONTROL

OFF or STOP

• PRIMER BULB

Push primer bulb, fully and slowly, 10 times.

• THROWN OBJECTS CAN CAUSE SEVERE INJURY

WARNING:

Small objects can be

propelled at high speed, causing injury.

Min. 50 ft

15 m

• KEEP BYSTANDERS AWAY

WARNING:

Keep all bystanders,

especially children and pets, at least 50 feet (15 m)

from the operating area.

• HOT SURFACE

WARNING:

Do not touch a hot muffler

or cylinder. You may get burned. These parts get

extremely hot from operation. When turned off, they

remain hot for a short time.

• DO NOT REPLACE CUTTING HEADS WITH BLADES*

WARNING:

When using a trimmer, to

prevent serious injury, do not replace the cutting head

with rigid or metal blades.
*This warning does not apply to units equipped with

blades, such as edgers and brush cutters.

Содержание TB25PS

























































Результаты поиска

Содержание TB25PS

Отзывы:

Похожие инструкции для TB25PS

Бренды по названию

Популярные бренды

Troy-Bilt TB25PS, Руководство оператора

Результаты поиска

Содержание TB25PS

Отзывы:

Похожие инструкции для TB25PS

Бренды по названию

Популярные бренды