Troxler 2701-B, Руководство по эксплуатации и инструкции, Страница: 79 / 106

Model 2701-B Appendix A–5
Batteries
The PaveTracker Plus is equipped with one set of rechargeable
nickel-metal hydride (NiMH) batteries (pack of five C
batteries). The gauge software monitors the NiMH battery
voltage. When the batteries are fully charged, the battery
voltage should be between 6.8 and 7.2 V dc. If the voltage
falls below 6.0 V dc, the gauge displays a low battery symbol
(

) in the upper right of the Ready screen. Recharge the
batteries as described below.
If the voltage falls below 5.5 V dc, the gauge powers down
automatically after completing any memory store functions
already in progress. Troxler recommends that the operator
recharge the NiMH batteries. The NiMH batteries can be fully
recharged in only 2.5 hours.
Charging
To charge the NiMH batteries, plug the charger into the
round jack on the front of the gauge. Plug the other end of
the ac charger into a standard 100–240 V ac outlet.
The dc adapter may be connected to any 12-14 V dc source
(such as a vehicle's cigarette lighter). To ensure a full charge,
charge the batteries for at least 2.5 hours. After charging, the
battery voltage should be between 6.8 and 7.2 V dc.
After recharging the batteries, unplug the charger from both
the wall outlet and the gauge. Store the charger for later use.
A. T
RO
UB
LE
SH
OO
TIN
G