Troxler 2701-B Скачать руководство пользователя страница 71

Страница: 71 / 106

Model 2701-B

5-11

♦

User ID

♦

Location (right or left) of centerline – This value is blank if

not in continuous mode.

♦

Distance from centerline – This value is 0.0 if not in

continuous mode.

♦

Latitude

♦

Longitude

♦

GPS Fix

Note that the station number, distance from centerline, and

location with respect to centerline fields are available only for

continuous

mode measurements.

Storing Data in Continuous Mode

When taking measurements in

continuous

mode, the operator

can store the data in the selected project by pressing the

〈

STORE

〉

key at any time when the gauge is displaying

measurement data, or after returning to the

Ready

screen.

The gauge displays:



Press

〈

〉

to store only the measurement results under

the active project and return to the previous screen.



Press

〈

YES

〉

to store the station number, distance from

centerline, and location with respect to centerline project

notes along with the measurement. The gauge displays:

Do You Want To

Add Not es?

<YES> or <NO>

I nput St at i on #

Pr ess <ENTER>

A. T

TIN

Содержание 2701-B











































































































Результаты поиска

Содержание 2701-B

Отзывы:

Troxler 2701-B, Руководство по эксплуатации и инструкции, Страница: 71 / 106

Результаты поиска

Содержание 2701-B

Отзывы: