2
Transport, storage and
packaging
Sharp edges and sheet metal parts
CAUTION!
Danger of injury from sharp edges and sheet
metal parts.
–
Always wear protective gloves when handling the
unit.
Damage to the VAV terminal unit
NOTICE!
Risk of damage to the VAV terminal unit!
–
Handle the unit with care.
–
Do not lift the VAV terminal unit by its control
components, the damper blade or differential
pressure sensor.
–
Lift the unit only by lifting the entire casing.
2.1 Delivery check
Check delivered items immediately after arrival for
transport damage and completeness. In case of any
damage or an incomplete shipment, contact the ship-
ping company and your supplier immediately.
The product is typically delivered mounted on a VAV ter-
minal unit.
Check the following items on delivery:
Easy controller
–
Transparent protective cap, or rubber terminal
covers for TVE type.
–
Mounted on the VAV terminal unit and fixed with
anti-rotation lock
–
Measuring hoses without kinks connected to the
VAV terminal unit (not on TVE type)
VAV terminal unit:
–
Scale sticker for setting q
vmin
/ q
vmax
in place
–
Adjustment sticker in place
–
Cable ties for wire clamping bracket in place
(not for TVE type)
2.2 Transport on site
If possible, transport the VAV terminal unit to the
installation location in the shipping container.
Do not remove the protective wrapping until just
before installation.
2.3 Bearing
If the product has to be stored temporarily:
Moisture and lack of ventilation can lead to oxida-
tion, even on galvanised components. Remove any
plastic wrapping in order to avoid oxidation.
Protect the product from dust and contamination.
Store the product in a dry place and away from
direct sunlight.
Do not store the product below -10 °C or above +50
°C.
2.4 Packaging
Properly dispose of packaging material.
Transport, storage and packaging
Packaging
Easy control component for VAV terminal units
9
