Ceiling systems
Fig. 8: Ceiling systems
①
Installation in T-bar ceilings
②
Installation in T-bar ceilings, diffuser face rests
on T-bars
③
Installation into grid ceilings
④
Installation in continuous ceilings
Installing the diffuser face
In order to protect the surface of the diffuser face,
unpack and install it only after all other construc-
tion steps have been completed.
If there is a lengthy break between installation
and commissioning, cover all openings of the
casing (e.g. with plastic) to protect the interior
and avoid cumbersome cleaning procedures at
the time of commissioning.
Fig. 9: Installing the diffuser face
1.
Glue the seal (Fig. 9/5) onto the reverse
edge of the plenum box.
2.
Fix the diffuser face (Fig. 9/2) with the cen-
tral fixing screw (Fig. 9/3) to the cross bar
(Fig. 9/1) and cover it with the decorative
cap (Fig. 9/4).
The diffuser face and the fixing elements
may differ from the variant shown.
Installation
Air terminal devices Ceiling diffusers
6
