Nominal sizes
200 × 430 – 1200 × 2030 mm
Casing lengths L = 250 mm
Parts and characteristics
Airflow direction is not critical
Fulfils pressure level 2 (operating pressure -1000 to 500 Pa)
For automatic and manual release
Smoke control damper with ventilation function
Attachments 1
Connecting subframe for calcium silicate and sheet steel smoke extract ducts
Cover grille – crimped wire mesh or square perforated metal plate
Cover grille – grille with straight or slanted blades
Attachments 2
Open/Close actuators with 24 V AC/DC or 230 V AC supply voltage
Network modules for the integration with AS-i networks
Network modules for other standard bus systems
Optional products
TROXNETCOM
X-FANS control unit extract air and smoke extract control
TROX-X smoke exhaust fans from the X-FANS subassembly
Smoke exhaust fan for roof installation BVDAX/ BVD
Smoke exhaust fan for wall installation BVW/ BVWAXN
Smoke exhaust centrifugal fan BVREH /BVRA
Smoke extract jet fans BVGAX/BVGAXN
All smoke exhaust fans are tested to
EN 12101-3, for F200/F300/
F400 and F600, depending on the type. With CE marking, declaration of performance and application
approval for the German market.
Speed adjustment on smoke exhaust fans
Certified frequency inverter unit X-FANS control
Safe and precise speed adjustment of smoke exhaust fans both in one-zone and in multi-zone systems.
Construction features
Rectangular construction
Smoke control damper actuator controlled by reversible open/close actuator
Remote control with actuator
Suitable for the connection of cover grilles or connecting subframes
Materials and surfaces
Casing, damper blade and actuator encasing made of calcium silicate
