DIMENSIONS, PRODUCT DETAILS
TROX Austria GmbH
Lichtblaustraße 15
1220 Wien, Austria
Telefon +43 1 250 43-0
Fax +43 1 250 43-34
Online-Services
Service-Hotlines
Sales Austria
and technical consulting
+43 1 250 43 0
Contact
TROX IN SOCIAL WEB
L
H
B
200 250 300 350 400 450 500 550 600 650
250
430 29 31 32 33 35 36 38 39 41 42
250
630 37 39 41 43 44 46 48 50 51 53
250
830 46 48 50 53 54 56 58 61 62 64
250
1030 54 56 59 61 63 66 68 70 73 75
250
1230 62 65 67 70 73 75 78 81 83 86
250
1430 71 73 76 79 82 85 88 91 94 97
250
1630 79 82 85 88 92 95 98 101 105 108
250
1830 87 91 94 98 101 105 108 112 115 119
250
2030 95 99 103 107 111 114 118 122 126 130
Installation and commissioning
Installation on/in concrete or masonry shaft walls
Installation in lightweight partition walls
Installation in shaft walls that are covered on one side
Installation in or on tested, fire-resistant vertical or horizontal smoke extract ducts
Installation in fire-resistant REI 90 or EI 90 walls
For smoke extract ducts made of calcium silicate from 35 mm wall thickness
For sheet steel smoke extract ducts
After installation the damper must remain accessible for inspection, cleaning and repair
Connected smoke extract ducts must have an inspection access
Mechanical smoke extract systems require that the power supply is maintained even in the event of a fire
Smoke control dampers must be installed, connected and attached according to the operating and installation manual
Homepage
>
Products
>
Fire and Smoke Protection
>
Smoke Control Damper
>
Type EK-JZ
Home Contact Imprint Delivery and payment terms Privacy Disclaimer
20.12.2020 © TROX
Austria GmbH
