EN
4
wind machine TTW 25000 S / TTW 35000 S
Information about the device
Device description
The wind machine TTW 25000 S / TTW 35000 S was designed
for a high air volume flow. The device is designed for indoor and
outdoor air circulation tasks.
The ready-for-use device has a galvanized housing with
chassis, which supports the adjustable two-stage fan in an
inclinable drum. Thanks to the adjustable inclination angle, the
wind machine can be variably aligned up to a vertical flow
position.
The fan motor is equipped with an automatic overheating
protection, which interrupts the power supply as soon as the
device begins to overheat.
To make the device easier to transport, it is fitted with a
transport handle and two wheels. Two feet with rubber buffers
prevent the device from rolling away.
Device depiction
1
2
4
5
6
3
7
No.
Designation
1
Air outlet
2
Wheels
3
Power cable with Schuko plug
4
Rotary switch for the
fan stage
5
Handwheel
6
Chassis
7
Feet
Transport and storage
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Transport
Before
transporting the device, observe the following:
•
Switch off the device.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
To make the device easier to transport, it is fitted with
wheels.
•
Do not use the power cable to drag the device.
•
Only wheel the device on a level and smooth surface.
After
transporting the device, observe the following:
•
Set up the device in an upright position after transport.
Storage
When the device is not being used, observe the following
storage conditions:
•
dry and protected from frost and heat
•
in an upright position where it is protected from dust and
direct sunlight
•
with a cover to protect it from invasive dust, if necessary
•
Place no further devices or objects on top of the device to
prevent it from being damaged.
