EN
2
wind machine TTW 25000 S / TTW 35000 S
•
Never insert any objects or limbs into the device.
•
Do not cover or transport the device during operation.
•
Do not sit on the device.
•
This appliance is not a toy! Keep away from children and
animals. Do not leave the device unattended during
operation.
•
Check accessories and connection parts for possible
damage prior to every use of the device. Do not use any
defective devices or device parts.
•
Ensure that all electric cables outside of the device are
protected from damage (e.g. caused by animals). Never
use the device if electric cables or the power connection
are damaged!
•
The electrical connection must correspond to the
specifications in chapter Technical data.
•
Insert the mains plug into a properly secured mains
socket.
•
Observe the technical data when selecting extensions to
the power cable. Completely unroll the extension cable.
Avoid electrical overload.
•
Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.
•
Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.
•
Do not under any circumstances use the device if you
detect damages on the mains plug or power cable.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk!
•
When positioning the device, observe the minimum
distances from walls and other objects as well as the
storage and operating conditions specified in the Technical
data chapter.
•
Make sure that the air inlet and outlet are not obstructed.
•
Make sure that there are no loose items located in the
immediate surroundings of air inlet and air outlet.
•
Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
•
Make sure that the suction side is kept free of dirt and
loose objects.
•
Do not tilt the fan during operation.
Make sure to always switch the device off, before
adjusting the inclination angle.
Please observe the warning on the device.
1. Loosen the handwheel (5).
ð
Then the inclination angle can be adjusted in both
directions up to the stop.
Note
Never go past the stop bolts when adjusting the fan
position! Do not remove the stop bolts!
