9
EN
Operating manual – dehumidifier TTP 5 E / TTP 10 E
Emptying the condensation tank
If the condensation tank is full, the indicator LED (10) lights up
orange. The device switches off.
1. Take the condensation tank out of the device.
11
2. Remove the rubber stopper (11) from the condensation
tank.
3. Empty the condensation tank over a drain or sink.
4. Put the rubber stopper (11) back in.
5. Rinse the tank with clear water. Clean the tank regularly
using a mild cleaning agent (no detergent!).
6. Refit the condensation tank into the device.
Make sure not to damage the float when inserting or
removing the condensation tank.
In doing so, make sure that the float is positioned
correctly.
In doing so, make sure that the condensation tank is
inserted correctly, for otherwise the device cannot be
switched back on.
Activities required after maintenance
If you want to continue using the device:
•
Reconnect the device to the mains.
If you do not intend to use the device for a considerable time:
•
Store the device according to the Storage chapter.
