Trotec TTK 53 E, Руководство по эксплуатации

Страница: 8 / 18

8 EN dehumidifier TTK 53 E / TTK 72 E
Operation
Notes:
• Avoid open doors and windows.
• After being switched on, the device operates fully
automatically.
• The fan permanently runs in dehumidification mode until
the set nominal value is reached. The fan keeps running
for approx. 3 minutes and then switches off.
Operating elements
12 13 14 16 17
24 23 22 21 20
15
18
11
19
No. Designation Meaning
11 TIMER button Starts programming for the timer
function
12 Plus arrow button Setting the relative room humidity
Setting the number of hours for
the timer function
13 Segment display Indicates the relative room
humidity level
Indicates the desired relative
room humidity during setting
Indicates continuous operation
CO in dehumidification mode
Indicates the number of hours
during timer programming
14 Minus arrow button Setting the relative room humidity
Setting the number of hours for
the timer function
15 Operating modes
indication
Indication of active operating
mode:
Automatic =
Automatic mode
Continuous = Dehumidification
(additionally continuous
operation)
Dry Clothes =
Laundry drying
function
Air Clean = Ventilation
No. Designation Meaning
16 MODE button Selection button for operating
modes:
Automatic mode
Dehumidification
(additionally
continuous operation)
Laundry drying function
Ventilation
17 STAND-BY button Power button:
Switches the device on or off
18 OPERATION indication Illuminated when the device is
switched on
19 AUTOMATIC indication Automatic mode is active
20 CONTINUOUS indication Dehumidification mode is active
Continuous operation is active
21 DRY CLOTHES
indication
Laundry drying mode is active
22 AIR CLEAN indication Ventilation mode is active
23 TANK FULL indication Illuminated when the
condensation tank is full
24 TIMER indication Illuminated when the timer is
programmed
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on.
1. Press the STAND-BY button (17).
ð
The device starts in automatic mode.
Setting the operating mode
Setting the relative room humidity
You can only change the relative room humidity in
dehumidification mode.
1. Press the arrow buttons (12, 14) to adjust the relative room
humidity. Setting is possible in the range between 30 %
and 80 % in increments of 5 %.
ð
The desired relative room humidity is indicated in the
segment display (13) for approx. 5 seconds. Then the
current relative room humidity is displayed again.