9
EN
Operating manual – dehumidifier TTK 110 HEPA
Setting the timer
The timer can be set in all operating modes.
The timer has two modes of operation:
•
automatic switch-on upon expiry of a preset number of
hours.
•
automatic switch-off upon expiry of a preset number of
hours.
The number of hours can range from 1 to 24 and can be
adjusted in increments of 1 h.
Notice
Do not leave the operating device unattended in a
freely accessible room with an activated timer.
Automatic switch-on
1. Switch off the device.
2. Press the
TIMER
button (33) several times until the desired
number of hours is displayed on the
temperature and timer
indication (18).
ð
The number of hours flashes on the
temperature and
timer
indication (18).
3. Wait for approx. 5 seconds in order to save the setting.
4. Press the
MODE
button (23) to select the operating mode
in which the device shall start up.
ð
The characters
ON
and the number of hours left until
switch-on appear on the
temperature and timer
indication (18).
ð
The timer setting equals the desired number of hours.
ð
The device starts in the previously selected operating mode
after the set time has elapsed.
Notes regarding automatic switch-on:
•
Pressing the
POWER
button (22) deactivates the automatic
switch-on function.
Automatic switch-off
ü
The device is switched on.
1. Press the
TIMER
button (33) several times until the desired
number of hours is displayed on the
temperature and timer
indication (18).
ð
The number of hours flashes on the
temperature and
timer
indication (18).
2. Wait for approx. 5 seconds in order to save the setting.
ð
The characters
OFF
and the number of hours left until
switch-off appear on the
temperature and timer
indication (18).
ð
The timer setting equals the desired number of hours.
ð
The device switches off after the set period of time.
Memory function
During short power failures, the device memorizes the
programmed nominal value for the humidity level, the timer and
the operating mode setting.
Auto stop function
If the water tank is full, not inserted correctly or the set room
humidity has been reached, the device will stop automatically.
Child lock
The child lock can be activated both during operation and in
standby mode.
1. Press the
MODE
button (23) for approx. 2 seconds.
ð
The child lock is activated.
ð
The
child lock
indication (16) appears on the display.
2. Press the
MODE
button (23) for approx. 2 seconds once
again.
ð
The child lock is deactivated.
ð
The
child lock
indication (16) disappears.
Swing function
Using the swing function, you can adjust the position of the
ventilation flap or activate continuous movement of the
ventilation flap. This enables an even distribution of the air
current in the room.
The swing function can be switched on and off regardless of the
operating modes. The setting is maintained even if the operating
mode is changed.
1. Press the
SWING
button (32).
ð
The ventilation flap moves up and down continuously.
2. Press the
SWING
button (32) again to stop the ventilation
flap in a certain position and to switch off the swing
function.
Changing the unit °C / °F
The temperature in the
temperature and timer
indication (18)
can be indicated in °C or °F.
Please proceed as follows to change the temperature unit:
1. Simultaneously press the
TIMER
(33) and
HUMIDITY
(34)
buttons.
ð
The displayed temperature is converted to the other
unit.
