Trotec TEH 200, Оригинальное руководство пользователя

Страница: 6 / 32

6 EN electric heater TEH 200 / TEH 300 / TEH 400
Storage
When the device is not being used, observe the following
storage conditions:
• dry and protected from frost and heat
• in an upright position where it is protected from dust and
direct sunlight
• with a cover to protect it from invasive dust, if necessary
• Before restarting the device, check the condition of the
power cable. If there are doubts as to the sound condition,
contact the customer service.
• Have the device checked once a year by an electrically
skilled person at any rate.
The device can be stacked for storage purposes. In doing so,
observe the following:
• Only use suitable lifting gear.
• Make sure that the rollers of the device at the bottom are
locked and the device cannot move. To protect the rollers
and the frame, the bottommost device is to be jacked up
as illustrated below.
Warning
To prevent damage to the device, the bottom strut
should not be allowed to rest on the support.
A minimum distance of 5 mm to the bottom must be
observed!
5 mm
• Make sure that the wheels of the device to be stacked are
pointing inwards as is indicated in the following figure.
• The maximum amount of devices to be stacked on top of
one another is 3 (for transportation in a truck:
max. 2 devices).
• Place the device at the bottom on firm, level ground.