EN
3
convector TCH 2310 E / 2311 E
•
Only put up the device in an upright, stable position on firm
ground.
•
Let the device dry out after a wet clean. Do not operate it
when wet.
•
Do not use the device with wet or damp hands.
•
Do not expose the device to directly squirting water.
•
Never insert any objects or limbs into the device.
•
Do not cover or transport the device during operation.
•
Do not remove any safety signs, stickers or labels from the
device. Keep all safety signs, stickers and labels in legible
condition.
•
Do not sit on the device.
•
This appliance is not a toy! Keep away from children and
animals. Do not leave the device unattended during
operation.
•
Check accessories and connection parts for possible
damage prior to every use of the device. Do not use any
defective devices or device parts.
•
Ensure that all electric cables outside of the device are
protected from damage (e.g. caused by animals). Never
use the device if electric cables or the power connection
are damaged!
•
The electrical connection must correspond to the
specifications in chapter Technical data.
•
Insert the mains plug into a properly secured mains
socket.
•
Observe the device's power input, cable length and
intended use when selecting extensions to the power
cable. Completely unroll extension cables. Avoid electrical
overload.
•
Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.
•
Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.
•
Do not under any circumstances use the device if you
detect damages on the mains plug or power cable.
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk!
•
During the installation of the device observe the minimum
distances from walls and other objects as well as the
storage and operating conditions specified in the Technical
data chapter.
•
Do not use the device in immediate proximity to curtains,
beds or sofas.
•
Make sure that the air inlet and outlet are not obstructed.
•
Make sure that the suction side is kept free of dirt and
loose objects.
•
Do not place the device on combustible ground.
•
Only use original spare parts, for otherwise safe and
functional operation cannot be ensured.
•
Allow the device to cool down before transport and/or
maintenance work.
•
Do not use this device near bathtubs, shower trays,
swimming pools or other water containers. Risk of electric
shock!
•
Do not use the device any more once it has been dropped.
•
Do not insert rechargeable batteries into the remote
control.
Intended use
The device is only suitable for well insulated spaces or
occasional use.
Only use the device for heating closed rooms whilst adhering to
the technical data.
Intended use comprises heating the air in:
•
living spaces
•
storerooms
•
salesrooms
•
construction areas
•
containers
•
basements
Improper use
•
Do not place the device on wet or flooded ground.
•
Do not place any objects, e.g. clothing, on the device.
•
Do not use this device in the vicinity of fuel, solvents,
varnishes or other easily inflammable vapours or in rooms
where these substances are stored.
•
Do not use the device outdoors.
•
Do not use the device for heating vehicles.
•
The device must not be used near swimming pools.
•
Do not use this device in the immediate vicinity of sinks,
bathtubs or other water containers.
Never immerse the device in water.
•
Any operation other than as described in this manual is
prohibited. Non-observance renders all claims for liability
and guarantee null and void.
•
Any unauthorised modifications, such as alterations or
structural changes to the device, are forbidden.
