8
EN
LED work lamp PWLS 05-10 / PWLS 06-10
4. Disconnect the USB charging cable (13) from the device
that has been charged, and from the device PWLS 06-10.
Note
The battery indication (4 blue LEDs) does not need to
be observed when charging an external device.
While charging, the battery indication (4 blue LEDs)
only displays the battery status of the device
PWLS
06-10
.
Note
Note that the device
PWLS 06-10
discharges when it is
used as power bank.
Shutdown (PWLS 05-10)
Warning of electrical voltage
Never touch the batteries in the battery
compartment (6) with wet or damp hands.
•
Switch the device off.
•
Remove the batteries from the battery compartment (6).
•
If required, allow the device to cool down.
•
Clean the device according to the Maintenance chapter.
•
Store the device according to the Storage chapter.
Shutdown (PWLS 06-10)
Note
Never touch the USB connections of the device
PWLS 06-10
with wet or damp hands.
1. Switch the device off.
2. Disconnect the USB charging cable (13).
3. If required, allow the device to cool down.
4. Clean the device according to the Maintenance chapter.
5. Store the device according to the Storage chapter.
Errors and faults
The device has been checked for proper functioning several
times during production. If malfunctions occur nonetheless,
check the device according to the following list.
Troubleshooting tasks which require the housing to be opened
must only be carried out by an authorized specialist electrical
company or by Trotec.
The battery does not charge:
•
Check if the USB charging cable is plugged in properly into
both the charger and the device.
Check if the USB charging cable is properly connected to
both the contacts of the charger and the device
PWLS
06-10
.
•
Check USB charging cable, charger and device
PWLS
06-10
for damages. Do not use the damaged device
anymore if you detect any damages. Contact the Trotec
customer service.
•
Check the fuse (home).
Note
The integrated battery might possibly be defective.
Contact the Trotec customer service.
The device is not lit:
•
The batteries might possibly be empty. Replace them with
new batteries.
•
The battery power might be too low. Charge the battery via
the USB charging cable and a charger.
•
On the battery indication (4 blue LEDs), you can check
whether the battery has been completely charged.
•
Check the USB charging cable for damages. If the USB
charging cable is damaged, stop using it. Contact the
Trotec customer service.
Note
The LEDs are possibly damaged. Contact the Trotec
customer service.
Note
Wait for at least 3 minutes after maintenance and
repair work. Only then switch the device back on.
Your device still does not operate correctly after these
checks?
Please contact the customer service. If necessary, bring the
device to an authorized specialist electrical company or to
Trotec for repair.
Maintenance
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug of the charger with wet or
damp hands.
•
Switch the device off.
•
Hold onto the mains plug while pulling the power cable of
the charger out of the mains socket.
•
Disconnect the USB charging cable.
•
Allow the device to cool down completely.
Warning of electrical voltage
Maintenance tasks which require the housing to be
opened must only be carried out by authorised
specialist companies or by Trotec.
Notes on maintenance
The device does not require maintenance.
