4
EN
LED work lamp PWLS 05-10 / PWLS 06-10
Residual risks
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of explosive substances
Do not expose the battery to temperatures above 75
°C! Do not let the battery come into contact with water
or fire! Avoid direct sunlight and moisture. There is a
risk of explosion!
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Caution
Keep a sufficient distance from heat sources.
Note
If you store or transport the device improperly, the
device may be damaged.
Note the information regarding transport and storage of
the device.
Information about the device
Device description
The devices
PWLS 05-10
and
PWLS 06-10
are equipped with
light-intense surface LEDs.
You can select between a high or low brightness level for both
devices. Moreover, you can select the strobe mode. In the
strobe mode, a flash effect can be created which can serve as
warning, marking or defence function. Both devices are
equipped with a transport handle and a wrist strap attachment.
A magnetic holder is positioned on the wrist strap attachment.
The device
PWLS 05-10
is operated with batteries. The batteries
are not included in the scope of delivery.
The device
PWLS 06-10
is operated with an integrated battery.
The battery is built-in and can be charged via a USB charging
cable and a standard charger. The standard charger is not
included in the scope of delivery.
The battery status can be read on the battery indication (4 blue
LEDs).
The device
PWLS 06-10
is equipped with a power bank
function.
Device depiction
Front view PWLS 05-10 and PWLS 06-10
1
2
No.
Designation
1
Surface LED
2
Transport handle with wrist strap attachment
