EN
9
spot cooling air conditioning unit PT 2000 SP
Inserting the air filter
Note
Do not operate the device without an inserted air filter!
Without the air filter, the inside of the device will be
heavily contaminated. This could reduce the
performance and result in damage to the device.
Make sure that the air filter (
7
) is installed before switching the
device on.
1. If the air filter (
7
) has not already been inserted, push the
air filter (
7
) into the designated recess.
7
Operation
•
Avoid open doors and windows.
Operating elements
8
4
No. Designation
Meaning
4
On/off
switch
Switching the device on or off
8
Condensation
tank full LED
Illuminated when the condensation tank
is full.
Warning of electrical voltage
Risk of electric shock!
The device does not have the appropriate protection
class for use in wet rooms.
There is a risk of electric shock!
Never use the device in wet rooms (e.g. in bathrooms
and laundry rooms) and never immerse the device in
water!
Switching the device on
1. Once you have completely installed the device as
described in the Start-up chapter, you can switch it on.
2. Set the on/off switch (
4
) to position
I
.
ð
The device starts in
spot cooling operation
.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
•
Switch the device off by setting the on/off switch (
4
) to
position
0
.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
Clean the device according to the Maintenance chapter.
•
Empty the condensation tank, if need be.
•
Store the device according to the Transport and storage
chapter.