EN
5
planer PPLS 10-750 / PPLS 10-800
Foreseeable misuse
The device is not suitable for planing metal.
The device is not intended for processing damp wood.
Any other use than the one described in the chapter "Intended
use" is regarded as reasonably foreseeable misuse.
Personnel qualifications
People who use this device must:
•
have read and understood the instructions, especially the
Safety chapter.
Personal protective equipment
Wear hearing protection.
Excessive noise can lead to hearing loss.
Wear eye protection.
With it you protect your eyes from splintering, falling
and flying pieces which could cause injuries.
Wear a protective mask.
It saves you from inhaling harmful dusts generated
when processing workpieces.
Wear protective gloves.
They protect your hands from burns, crushing injuries
and skin abrasions.
Wear tight-fitting protective clothing.
This protects you from the draw-in and entanglement
hazard posed by rotating parts.
Residual risks
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Do not touch the mains plug with wet or damp hands.
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning of electrical voltage
Make sure that you do not contact power lines.
Improper handling of the device entails a risk of
electric shock!
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of explosive substances
Fine dust produced during planing is highly flammable.
Risk of fire and explosion!
Use a dust or chip bag or a dust extraction system for
collecting the produced dusts.
Warning of hot surface
The cutting head might still be hot after the application.
Burn hazard when touching the cutting head.
Do not touch the cutting head bare-handed!
Wear protective gloves!
Warning of hand injuries
Crushing hazard near cutting head and base plate if
handled without due care.
Wear protective gloves!
Warning of hand injuries
Do not insert any limbs or objects into the chip ejector.
Crushing hazard if handled without due care.
Wear protective gloves!
Warning of sharp object
Blades have sharp cutting edges. Risk of injury from
cuts if handled without due care.
Wear protective gloves!
Warning
Toxic dusts!
The harmful / toxic dusts produced during operation
pose of risk to the health of the operator and persons
in the vicinity.
Wear eye protection and a dust mask!
Warning
Do not process materials containing asbestos.
Asbestos is considered carcinogenic.
Warning
Risk of injuries caused by flying parts.
Use a dust or chip bag or a dust extraction system.