Trotec POWERSHRED, Руководство по эксплуатации

Страница: 17 / 28

EN Infrared Camera – Operating Manual
B - 16
Moving the analysis
1. Start with Step 1 of the menu item to reach the
desired area.
2. Press the
s
up /
down
t
arrow on
the omni selector to
move the selected
profile
Deleting the Profile analysis
1. Start with Step 1 of the menu item to select the
desired area.
2. Press C to delete the Profile Analysis.
Isotherm analysis
1. Press the MENU/EN-
TER key.
2. Press the
s
up/
down
t
arrow on
the omni selector to
reach the menu item
[Analysis].
3. Press the arrow
s
up / down
t
to get
to the menu item
[Isotherm] and press
the MENU/ENTER key.
Areas that are not
within the selected isotherm range are displayed in
a different colour.
4. Setting the isotherm
range.
• Start with Step 1 to
select the Isotherm
Analysis.
• Press the arrow
key
s
up / down
t
on the omni
selector to move the
isotherm range upwards or downwards. Press the
left / right key to increase or decrease the isotherm
range by changing the lower isotherm level (IL).
• The letters IL and IH appear in the bottom
right-hand corner. IH is the upper threshold
and IL the lower threshold of the isotherm
range.
Removing analysis Tools
The following subject matter briefly explains how to
remove the analysis tools that have been placed on
the screen.
1. Press MENU/ENTER.
2. Press the up
s
and
down
t
arrow on the
omni selector to se-
lect the menu item
[Analysis].
3. Select the analysis
tool you wish to remove.
4. Press the C key to delete the tool or press the MENU/
ENTER key to delete all the analysis tools.
Saving Images
Press the S key to save a previously frozen image into
the memory. You can also save an image into the me-
mory without freezing it first by keeping the key on the
omni selector pressed for 3 seconds while the camera
is in zero mode.
1. Press the MENU/ENTER key.
2. Press the
left or
right arrow on the
omni selector to se-
lect the menu item
[File].
3. Press
s
up and
down
t
arrow on the
omni selector to se-
lect [Save], then press
the MENU/ENTER key
to save the image.The
display mode shows
the memory mode.