16
EN
cordless grinder PMTS 01-12V
Using a tool with mandrel
The following tools are mounted by means of a corresponding
mandrel:
•
Polishing attachments (
19
)
•
Cutting discs (
8
)
•
Abrasive wheels (
9
)
To mount the tool on the mandrel, please proceed as follows:
Polishing attachments:
1. Insert the mandrel for polishing attachments (
16
) into the
device as described in the chapter "Tool change".
2. Press the spindle lock (
1
) button and keep it pressed.
3. Screw the polishing attachment (
19
) onto the thread of the
mandrel in clockwise direction and then let go of the
spindle lock (
1
) button again.
19
16
Cutting discs/abrasive wheels:
1. Insert the mandrel for cutting discs/abrasive wheels (
15
)
into the device as described in the "Tool change" chapter.
2. Press the spindle lock (
1
) button and keep it pressed.
3. Unscrew the screw (
28
) from the mandrel by turning the
screw in counter-clockwise direction.
28
4. Place a cutting disc (
8
) or abrasive wheel (
9
) between the
two washers (
29
) onto the screw (
28
) and tighten it to the
mandrel again in clockwise direction.
29
5. Release the button of the spindle lock (
1
) again.
Speed selection
The required speed depends on the material and the operating
conditions and can be determined by way of field-testing. For
most tasks like for example sawing, cutting and grinding harder
materials such as wood or metal, we recommend using the
MAX
speed level. Some materials (certain plastics and soft
metals), however, may be damaged by the heat generated at a
high speed and should therefore be processed at a
correspondingly lower speed.
The setting range covers the levels MIN, 1 – 5 and MAX
(5,000 – 25,000 rpm). You can change the preselected speed
level at any time.
1. Turn the setting wheel (
25
) to the desired speed level.
25
