EN
15
cordless grinder PMTS 01-12V
Tool change
Wear protective gloves
Wear appropriate protective gloves when inserting or
exchanging tools.
Note
Never actuate the spindle lock (
1
) button while the tool
is running! This may damage the tool.
Info
Before changing the tool, check whether the suitable
collet chuck is mounted and replace it, if necessary.
In order to change the tool, proceed as follows:
1. Press the spindle lock (
1
) and keep it pressed.
2. Slowly rotate the tool holder (
22
) to the locking point until
the locking mechanism is fixed.
3. Unscrew the clamping nut (
26
) using the wrench (
7
) by
turning it in counter-clockwise direction. It is not necessary
to fully unscrew the clamping nut.
4. Remove the tool from the tool holder (
22
), if any.
26
5. Insert the tool required into the tool holder (
22
).
6. Tighten the clamping nut (
26
) using the wrench (
7
) and let
go of the spindle lock (
1
).
7. Make sure that the tool is attached securely.
