Trotec PJSS11-20V, Руководство по эксплуатации

Страница: 9 / 22

EN 8 Operating manual – cordless pendulum action jigsaw PJSS 11-20V
Scope of delivery
• 1 x Cordless pendulum action jigsaw
• 1 x Rip fence
• 2 x Saw blade HCS wood
• 1 x Saw blade HSS metal
• 1 x Adapter for dust extraction
• 1 x Anti-splinter guard
• 1 x Sliding block
• 1 x Rechargeable battery
• 1 x Quick charger
• 1 x Allen wrench
• 1 x Transport case
• 1 x Manual
Technical data
Parameter Value
Model PJSS 11-20V
Idle speed 0 – 2,700 spm
Cutting angle 0° / 15° / 30° / 45°
Weight incl. battery 2 kg
Battery Multiflex 20-2.0 DC
Type Li-ion
Nominal voltage 20 V
Capacity 2 Ah
Quick charger Multiflex 20-2.0 AC
Input
Nominal voltage 230 - 240 V / 50 Hz
Power consumption 65 W
Output
Nominal voltage 21.5 V
Charging current 2.4 A
Charging time 1 h
Protection class
II /
Vibration information according to EN 60745
Total vibration emission value:
Sawing chipboards a
h,B
Uncertainty K
5.860 m/s²
1.5 m/s²
Sawing sheet metal a
h,B
Uncertainty K
6.148 m/s²
1.5 m/s²
Sound values according to EN 60745
Sound pressure level L
pA
85 dB(A)
Sound power L
WA
96 dB(A)
Uncertainty K 3 dB
Wear hearing protection.
Excessive noise can lead to hearing loss.
Information on noise and vibration:
• The vibration level specified in these instructions was
determined by means of a measuring method standardized
in EN 60745 and can be used for a device comparison. The
specified vibration emission value may also be used for a
preliminary assessment of the exposure.
Caution
Vibration emissions can cause a health hazard if the
device is used for an extended period of time or if it is
not properly handled and maintained.
• The vibration level will change depending on the
application of the power tool and may in some cases differ
from the value specified in these instructions. The vibration
load may be underestimated if the power tool is used
regularly in such a way. For a precise estimation of the
vibration load during a certain work period, it is also
important to consider the periods during which the device
is switched off, or is running but not actually employed.
This can reduce the vibration load over the entire work
period significantly.