Trotec PJSS11-20V, Руководство по эксплуатации

Страница: 15 / 22

EN 14 Operating manual – cordless pendulum action jigsaw PJSS 11-20V
Adjusting the cutting angle
The cutting angle can be adjusted to the left or right at angles of
0° / 15° / 30° / 45°.
1. Remove the battery (19) from the device (see Removing
the battery).
2. First, remove the anti-splinter guard (11) and the
protective cover (16).
16
11
19
3. Loosen the screws (14) at the bottom of the device using
the Allen wrench (20).
14
4. Slide the base plate to the rear until it can be freely
rotated.
5. Set the desired cutting angle. The number of degrees to be
set is engraved on the base plate.
6. Slide the base plate back to the front until the toothing
engages.