Trotec PJSS11-20V, Руководство по эксплуатации

Страница: 12 / 22

11 EN Operating manual – cordless pendulum action jigsaw PJSS 11-20V
Inserting the battery
1. Slide the battery (19) onto the device until it locks in place.
19
23
Removing the battery
1. Detach the battery (19) from the device by pressing and
holding the unlocking button (23; I.) and pulling the battery
off the device (II.).
I.
II.
19
2. If required, charge the battery (19) as described in the
section Charging the battery .
Checking the battery status
The battery comes with an integrated battery level indication.
The battery status is displayed as follows by the three LEDs of
the battery level indication (18):
LED colour Meaning
Green – Orange – Red maximum charge / power
Orange – Red medium charge / power
Red weak charge – Recharge the
battery.
1. Press on the battery icon (27) on the battery (19).
ð
You can read the battery status from the battery level
indication (18).
18
27
Changing the saw blade
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket and the battery from the device!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Wear protective gloves
Wear appropriate protective gloves when inserting or
exchanging tools.
As standard, the device is supplied with 2 saw blades for cutting
in wood and one saw blade for cutting in light metals.
Please proceed as follows to remove or insert a saw blade:
1. Remove the battery (19) from the device (see Removing
the battery).
2. Detach the protective cover (16).
16