EN
4
Operating manual – Impact drill PHDS 10-230V
•
Regularly check the drill chuck for wear or damage.
•
Only start a percussive power tool while holding it
against a workpiece (wall, ceiling, etc.).
•
Wait until the power tool has come to a standstill,
before putting it down.
•
Processing metal creates flying sparks.
Make sure that
nobody's safety is jeopardized and that there are no
combustible materials near the working area. Fire hazard!
•
Avoid drilling in lead paint or other harmful materials.
•
Always keep the power cable behind the device.
•
Make sure that the venting slots are not covered
during operation.
Do not insert any objects into the
venting slots.
•
The device must always be clean, dry and free from oil
or greases.
Intended use
Only use the device
PHDS 10-230V
:
•
for screwing in and loosening screws,
•
for drilling in wood, plastic, ceramic and metal,
•
for impact drilling in masonry, bricks and stone,
whilst adhering to the technical data (see operating manual).
We recommend using the power tool with original Trotec
accessories.
Improper use
The device is not intended for drilling in natural stone.
Personnel qualifications
People who use this device must:
•
have read and understood the operating manual, especially
the Safety chapter.
Symbols on the device
Symbols
Meaning
This symbol located on the device indicates
that it is prohibited to press the spindle lock
during operation. Pressing the spindle lock
during operation can damage the motor
and / or gear.
Personal protective equipment
Wear protective headgear.
With it you protect your head from splintering, falling
and flying pieces which could cause injuries.
Wear hearing protection.
Excessive noise can lead to hearing loss.
Wear eye protection.
With it you protect your eyes from splintering, falling
and flying pieces which could cause injuries.
Wear a protective mask.
It saves you from inhaling harmful dusts generated
when processing workpieces.
Wearing protective gloves.
They protect your hands from burns, crushing injuries
and skin abrasions.
Wear tight-fitting protective clothing.
This protects you from the draw-in and entanglement
hazard posed by rotating parts.
Wear safety boots.
They protect your feet from splintering, falling and
flying pieces which could cause injuries.
Residual risks
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning of electrical voltage
There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.
Warning of hot surface
The insertion tool might still be hot after the
application. Burn hazard when touching the insertion
tool.
Do not touch the insertion tool bare-handed!
Wear protective gloves!
