EN
14
Operating manual – Impact drill PHDS 10-230V
Selecting the rotational direction
Notice
Only change the rotational direction when the device is
at a standstill! Otherwise the device might be
damaged.
The motor's rotational direction can be changed by means of
the switch for clockwise/counter-clockwise rotation (11).
1. Set the switch to
R
for rotation to the right.
11
2. Set the switch to
L
for rotation to the left.
Shutdown
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
•
Switch off the device.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
•
If required, allow the device to cool down.
•
Remove the tool from the device (see Start-up chapter).
•
Clean the device according to the Maintenance chapter.
•
Store the device according to the Storage chapter.
Available accessories
Warning
Only use accessories and additional equipment
specified in the operating manual.
Using insertion tools or accessories other than those
specified in the operating manual may cause a risk of
injury.
Accessories
Article number
Rock drill bit set, 15-piece
6,200,001,151
Wood drill bit set, 15-piece
6,200,001,101
Metal drill bit set HSS, 15-piece 6,200,001,131
Screw bit set, 32-piece
6,200,001,001
