background image

17

EN

Operating manual – cordless hammer drill PHDS 10-20V

Maintenance

Activities required before starting maintenance

Warning of electrical voltage

Do not touch the mains plug or the battery with wet or
damp hands.

Switch off the device.

Allow the device to cool down completely.

Remove the battery from the device.

Warning of electrical voltage
Maintenance tasks which require the housing to be
opened must only be carried out by authorised
specialist companies or by Trotec.

Notes on maintenance

Inside the device, there are no parts that need to be maintained
or lubricated by the user.

Cleaning

The device should be cleaned before and after each use.

Note

The device does not have to be lubricated after cleaning.

Warning of electrical voltage

There is a risk of a short-circuit due to liquids
penetrating the housing!
Do not immerse the device and the accessories in
water. Make sure that no water or other liquids can
enter the housing.

Clean the device with a soft, damp and lint-free cloth.
Ensure that no moisture enters the housing. Protect
electrical components from moisture. Do not use any
aggressive cleaning agents such as cleaning sprays,
solvents, alcohol-based or abrasive cleaners to dampen
the cloth.

Dry the device and the bits with a soft cloth, lint-free cloth.

Remove any drilling dust and, if applicable, wood chips
from the keyless drill chuck.

Keep the connecting terminals on the device, battery pack
and charger clean.

Keep the ventilation openings free from dust deposits to
prevent overheating of the motor.

Disposal

The icon with the crossed-out waste bin on waste

electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com. The separate collection
of waste electrical and electronic equipment aims to enable the
re-use, recycling and other forms of recovery of waste
equipment as well as to prevent negative effects for the
environment and human health caused by the disposal of
hazardous substances potentially contained in the equipment.
You are responsible for deleting any personal data stored on the
waste equipment to be disposed of.

Li-Ion

In the European Union, batteries and accumulators must not be
treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6 September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.

Содержание PHDS 10-20V





















Отзывы: