Trotec PHDS 10-20V, Руководство по эксплуатации

Страница: 16 / 20

15 EN Operating manual – cordless hammer drill PHDS 10-20V
Switching the device on and off
Wear your personal protective equipment when working with
the device.
The device has an infinitely variable speed control. The more
firmly you push the on / off switch (16), the higher is the speed.
1. Check whether the tool clamped in and the torque setting
selected are suitable for the intended application.
2. Check whether the workpiece is secured and the worktop
prepared correspondingly.
3. Press and hold the on / off switch (16) during screwing or
drilling.
ð
The device operates with the previously selected
settings.
ð
The LED work lamp (17) is illuminated.
16
17
4. Let go of the on / off switch (16) to stop the device.
ð
The LED work lamp (17) turns off.
Info
The motor has an integrated brake that quickly stops
the motor once you let go of the on / off switch (16).
Shutdown
1. Set the switch for clockwise / counter-clockwise rotation (5)
to centre position (lock).
2. If required, allow the device to cool down.
3. Remove the battery from the device (see Start-up chapter).
4. Remove the tool from the device (see Start-up chapter).
5. Clean the device according to the Maintenance chapter.
6. Store the device according to the Storage chapter.
Available accessories
Warning
Only use accessories and additional equipment
specified in the operating manual.
Using insertion tools or accessories other than those
specified in the operating manual may cause a risk of
injury.
Accessories Article number
Spare battery Multiflex 20V 6.200.000.301
Rock drill bit set, 15-piece 6.200.001.151
Screw bit set, 32-piece 6.200.001.001
Wood drill bit set, 15-piece 6.200.001.101
Metal drill bit set HSS, 15-piece 6.200.001.131