Trotec PCPS 10-16V, Руководство по эксплуатации, Страница: 13 / 18

EN 12 Operating manual – PCPS 10-16V / PCPS 11-16V
5. Press the on/off switch (7) and hold it during operation.
ð
The LED work lamp (8) is illuminated.
ð
The cordless compressor will be switched off upon
reaching the set pressure level.
7
6. Let go of the on/off switch (7) to stop the device.
ð
The LED work lamp (8) goes out.
7
7. To switch the device off, press and hold the power
button (36) at the display for approx. 3 s.
8. Remove the compressed-air hose or the valve adapter.
Tips and notes on handling the cordless air pump
General information:
• Keep the venting slots clear to prevent the motor from
overheating.
• The device is not suitable for continuous operation. The
device must not be used in continuous operation for more
than 20 minutes.
Switching the cordless air pump on and off
1. Check whether the nozzle is suitable for the intended
application.
2. Check whether the nozzle is connected either to the air
inlet (10) for deflation or to the air outlet (15) for inflation.
3. Connect the nozzle (17) to the item to be in- or deflated.
4. Press the on/off switch (13) and hold it during operation.
ð
The LED work lamp (14) is illuminated.
13