EN
10
Operating manual – local air conditioner PAC 2000 S / PAC 2600 S
Connecting the condensation drain hose
If you use the device for an extended period of time or you don't
want to empty the tank all the time, you can connect a
condensation drain hose to the hose connection.
ü
The device is switched off.
ü
The device is disconnected from the mains.
1. Carefully transport or wheel the device to a suitable
location for discharging the condensate (e.g. a drain) or
position a suitable collection container under the
condensate outlet.
2. Remove the rubber stopper from the hose connection (5).
3. Connect the condensation drain hose to the hose
connection (5).
4. Guide the other hose end to a suitable drain or sufficiently
dimensioned collection container. To ensure that the
condensate can run off, the condensation drain hose must
not be kinked, nor should it have to overcome an uphill
incline towards the drain.
Setting the timer
The timer has two modes of operation:
•
automatic switch-on upon expiry of a preset number of
hours
•
automatic switch-off upon expiry of a preset number of
hours
The timer can be programmed in increments of 1 hour (1 h to
24 h).
The function can be set in all operating modes. It can be
activated both during operation and in standby mode.
Note
Do not leave the operating device unattended in a
freely accessible room with an activated timer.