Trotec IRO 15, Оригинальное руководство пользователя

Страница: 9 / 21

EN 9 infrared radiant oil heater IRO 15
• The inlet and outlet openings must not be covered.
• There must be a sufficient number of fire extinguishers
available.
1,5 m
2,5 m
1,5 m
1,5 m 1,5 m
Start-up
• Check the scope of delivery of your device for
completeness. If an accessory part is missing, please
contact the Trotec customer service or the specialist dealer
where you purchased the device.
• Check the device and its connection parts for potential
damage.
• Observe the conditions described in the chapter
Positioning.
• Fill the tank with EL fuel oil or diesel as described in
chapter Assembly.
• Check the device for its proper condition prior to start-up
and at regular intervals during application.
• Make sure that the characteristics of the power grid
conform to those on the nameplate.
• Connect the power cable to a properly secured socket. On
construction sites, there must be a residual current
device (RCD) upstream of the socket in accordance with
national regulations (in Germany: VDE 0100/0105).
The device is now ready for operation.
Filling the tank
The fuel tank cap and the filling level indication are located at
the rear of the device on the tank.
ü
Before attempting to fill the tank, wait until the device has
cooled down completely.
ü
Only use fuel suitable for the device (see technical data).
1. Position the device on firm, level and incombustible
ground.
2. Unscrew the fuel tank cap (9).
10
9
3. Fill the tank. In doing so, observe the filling level
indication (10). Stop filling the tank just before the red
range.
4. Screw the fuel tank cap (9) back onto the tank. Observe
the recesses at the tank opening and the protrusions at the
fuel tank cap. They must be aligned when attaching the
fuel tank cap. Make sure that the fuel tank cap is firmly
attached to avoid leakage.
10
9