EN
7
air cleaner AirgoClean® 200 E
Operation
Note
Avoid open doors and windows.
Control panel
8
9
10 11
13
12
15 16
17
5
18
19
14
No.
Designation
Meaning
5
Segment display
Indicates the measured air quality
and the time when a timer is set
8
Light sensor
The light sensor detects when the
surroundings are dark.
The device switches to night mode if
automatic mode is selected.
9
Air quality
button
Briefly press the button to measure
the air quality.
Press the button for 3 seconds if you
want to reset the
HEPA carbon filter
LED (
18
) or
Prefilter
LED (
19
) after a
filter change.
10
Timer
button
Switching on the timer function:
12 h, 24 h, 48 h, 72 h
11
Timer
LED
Illuminated when the timer is
activated
13
Speed
LED
Indication of the selected fan speed
12
Speed
button
Setting the fan speed in 3 stages:
•
I
= stage 1
•
II
= stage 2
•
III
= stage 3
No.
Designation
Meaning
14
Mode
LED
Illuminated according to the selected
operating mode:
•
Auto
LED = automatic mode
•
Sleep
LED = night mode
•
Turbo
LED = turbo mode
15
Mode
button
Selecting the operating mode:
•
Automatic mode
•
Night mode
•
Turbo mode
16
On/Off
button
Switching the device on and off
17
Air quality
LED
Is illuminated according to the air
quality:
•
blue = good
•
orange = medium
•
red = poor
18
HEPA carbon filter
LED
If the
Replace
indication is
illuminated and the last bar of the
LED is illuminated in red, the
HEPA carbon filters need to be
replaced.
The individual bars indicate the
degree of contamination. The higher
the degree of pollution, the fewer
bars are displayed.
19
Prefilter
LED
If the
Clean
indication is illuminated
and the last bar of the LED is
illuminated in red, the prefilters need
to be cleaned.
The individual bars indicate the
degree of contamination. The higher
the degree of pollution, the fewer
bars are displayed.
Switching the device on
Once you have completely installed the device as described in
the Start-up chapter, you can switch it on. When the power
cable has been connected, the segment display lights up briefly
and an acoustic signal is emitted. Afterwards, the device is in
standby mode.
Please proceed as follows to switch the device on:
1. Press the
On/Off
button (
16
).
ð
The segment display is illuminated.
ð
The
Auto
LED (
14
) is illuminated. The device is now in
automatic mode
.
ð
The device measures the air quality within 10 seconds.
The segment display (
5
) and the
Air quality
LED (
17
) are
illuminated in blue, orange or red depending on the air
quality. The measured air quality is indicated on the
segment display (
5
).