EN
11
air cleaner AirgoClean® 11 E
Activities required before starting maintenance
Warning of electrical voltage
Do not touch the mains plug with wet or damp hands.
•
Switch the device off.
•
Hold onto the mains plug while pulling the power cable out
of the mains socket.
Warning of electrical voltage
Tasks which require the housing to be opened
must only be carried out by authorised specialist
companies or by Trotec.
Cleaning the housing
Clean the housing with a soft, damp and lint-free cloth. Make
sure that no moisture enters the housing. Protect electrical
components from moisture. Do not use any aggressive cleaning
agents such as cleaning sprays, solvents, alcohol-based or
abrasive cleaners to dampen the cloth.
Visual inspection of the inside of the device for dirt
1. Remove the air filter.
2. Use a torch to illuminate the openings of the device.
3. Check the inside of the device for dirt.
4. If you see a thick layer of dust, clean the inside of the
device with a vacuum cleaner.
5. Put the air filter back in.
Changing the HEPA carbon filter
Note
Do not operate the device without a HEPA carbon filter
inserted!
Note
The HEPA carbon filter is not washable. Do not use
water or liquid cleaning agents to clean the
HEPA carbon filter.
•
The HEPA carbon filter has to be replaced as soon as it is
dirty. This is brought to light e.g. by a reduced capacity
(see chapter Errors and faults).
•
Make sure that the HEPA carbon filter is installed before
switching the device on.
•
Without the HEPA carbon filter, the device cannot fulfil its
air cleaner function, and the inside of the device will be
soiled.
The HEPA carbon filter should be replaced in case of heavy
soiling.
The lifetime of the HEPA carbon filter is approx. 4 months at a
runtime of 12 hours per day and depends on the ambient
conditions and the degree of air pollution.
If required, visually inspect the HEPA carbon filter for dirt.
1. Remove the bottom plate (16) by turning it into the
Open
direction of the arrow.
16
