EN
13
air cleaner AirgoClean® 11 E
Cleaning the air quality sensor
The air quality sensor (4) has to be cleaned once it is soiled and
if the
air quality
LED (14) is illuminated in red for a longer period
of time (please also refer to the chapter Operation and the
chapter Errors and faults).
1. Clean the sensor using a soft, lint-free cloth. Do not use
water to clean the sensor as it could damage it.
4
Activities required after maintenance
If you want to continue using the device:
•
Reconnect the device to the mains.
If you do not intend to use the device for a considerable time:
•
Store the device according to the Storage chapter.
Technical annex
Technical data
Parameter
Value
Model
AirgoClean
®
11 E
Air flow rate with HEPA carbon
filter
Fan stage
I
Fan stage
II
Fan stage
III
42 m
3
/h
72 m
3
/h
120 m
3
/h
Ambient temperature
5 °C to 40 °C
Operating range
30 % to 90 % RH
Mains connection (adapter)
100-240 V~ 50-60 Hz
Power consumption
11 W
Nominal current
1.0 A
Dimensions (length x width x
height)
238 x 238 x 335 mm
Minimum distance to walls and
other objects
A: top
B: rear
C: side
D: front
30 cm
30 cm
30 cm
30 cm
Weight
2.5 kg
Disposal
The icon with the crossed-out waste bin on waste
electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website https://de.trotec.com/shop/.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.
