EN
2
Operating manual – air cleaner AirgoClean 10 E
•
Ensure that all electric cables outside of the device are
protected from damage (e.g. caused by animals). Never
use the device if electric cables or the power connection
are damaged!
•
The electrical connection must correspond to the
specifications in chapter Technical data.
•
Insert the mains plug into a properly secured mains
socket.
•
Observe the technical data when selecting extensions to
the power cable. Completely unroll the extension cable.
Avoid electrical overload.
•
Before carrying out maintenance, care or repair work on
the device, remove the mains plug from the mains socket.
Hold onto the mains plug while doing so.
•
Switch the device off and disconnect the power cable from
the mains socket when the device is not in use.
•
Do not under any circumstances use the device if you
detect damages on the mains plug or power cable.
If the supply cord is damaged, it must be replaced by the
manufacturer, his service agent or similarly qualified
persons in order to avoid a hazard.
Defective power cables pose a serious health risk.
•
When positioning the device, observe the minimum
distances from walls and other objects as well as the
storage and operating conditions specified in the Technical
data chapter.
•
Ensure that the air inlet and outlet are not obstructed.
•
Make sure that there are no loose items located in the
immediate surroundings of air inlet and air outlet.
•
Do not expose the device to heat or direct sunlight.
Intended use
Use the device
AirgoClean 10 E
for cleaning the air as well as
for odour elimination (ionization) in interior spaces only whilst
adhering to the technical data and safety instructions.
Improper use
•
Do not place the device on wet or flooded ground.
•
Do not place any objects, e.g. clothing, on the device.
•
Do not use the device outdoors.
•
Do not use the device in bathrooms and rooms with a high
humidity level.
•
Do not use the device in rooms where large amounts of
dust are produced, e.g. in production halls, workshops or
on construction sites.
•
Moreover, the integrated filter system is not suited for
removing dusts that are potentially harmful to health (e.g.
pollutants) from the air.
•
Any operation other than as described in this manual is
prohibited. Non-observance renders all claims for liability
and guarantee null and void.
•
Any unauthorised modifications, alterations or structural
changes to the device are forbidden.
Personnel qualifications
People who use this device must:
•
be aware of the dangers that occur when working with
electrically driven air cleaners.
•
have read and understood the operating manual, especially
the Safety chapter.
Residual risks
Warning of electrical voltage
Work on the electrical components must only be
carried out by an authorised specialist company!
Warning of electrical voltage
Before any work on the device, remove the mains plug
from the mains socket!
Hold onto the mains plug while pulling the power cable
out of the mains socket.
Warning
Dangers can occur at the device when it is used by
untrained people in an unprofessional or improper way!
Observe the personnel qualifications!
Warning
The device is not a toy and does not belong in the
hands of children.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
Notice
Do not operate the device without a HEPA filter
inserted!
Notice
Do not use abrasive cleaners or solvents to clean the
device.
Behaviour in the event of an emergency
1. Switch the device off.
2. In an emergency, disconnect the device from the mains
feed-in: Hold onto the mains plug while pulling the power
cable out of the mains socket.
3. Do not reconnect a defective device to the mains.
