Trotec 1210002004, Руководство по эксплуатации, Страница: 8 / 18

7 Operating manual – Local air conditioner PAC 2000 E EN
Settings using the remote control
Setting the fan stage
• Using the FAN button (30) on the remote control you can set
the desired fan stage from all operating modes.
Time preselection (timer)
The timer has two modes of operation:
– automatic switch-on after a pre-set number of hours
(T-ON).
– automatic switch-off after a pre-set number of hours
(T-OFF).
The number of hours can range from 0.5 to 24.
Automatic switch-on
• For programming the time until switch-on, the device must
be switched off.
1. Press the TIMER button (28) on the remote control.
– The T-ON (33) arrow flashes.
2. Press the plus (26) or minus (31) button within 5 s in order to
set the desired number of hours.
3. Press the TIMER button (28) again to save the setting.
– The T-ON (33) indication is illuminated.
– The timer is set for automatic switch-on.
Automatic switch-off
• For programming the time until switch-off, the device must
be switched on.
1. Press the TIMER button (28) on the remote control.
– The T-OFF (33) arrow flashes.
2. Press the plus (26) or minus (31) button within 5 s in order to
set the desired number of hours.
3. Press the TIMER button (28) again to save the setting.
– The T-OFF (33) indication is illuminated.
– The timer is set for automatic switch-off.
Deleting the timer
1. Press the TIMER button (28) on the remote control.
– The remaining time is indicated on the display.
2. Press the TIMER button (28) again within 5 s to delete the
timer setting.
No. Designation Function
24 Display Indication of various values and settings of
the device.
25 MODE button Setting the operating mode:
• COOLING (COOL)
• DEHUMIDIFICATION (DRY)
• VENTILATION (FAN)
26 Plus button Increases the target temperature value in
COOLING mode or the number of hours for
the timer.
27 SWING button Not available for this device.
28 TIMER button By use of the timer function you can set the
switch-on or switch-off time at 30-minute
intervals from 0.5 to 24 hours.
29 SLEEP button Setting the sleep function (only in COOLING
mode).
30 FAN button Setting the fan stages.
31 Minus button Reduces the target temperature value in
COOLING mode.
32 ON/OFF button Switches the device on or off.
33 T-ON and T-OFF indication T-ON: Activates the switch-on time if the
device is switched off.
T-OFF: Activates the switch-off time if the
device is switched on.
34 Temperature unit indication °C or °F
35 Transmitter indication
Is illuminated when the remote control is
sending a signal to the device.
36 SWING indication Not available for this device.
37 SLEEP indication Is illuminated when the sleep function is
activated.
38 LOCK indication Indicates that the remote control's key lock
(child lock) is activated.
39 SPEED indication Indicates the selected fan stage.
40 Timer setting indication Flashes during timer setting.
41 Temperature/hour
indication
Indicates the target temperature or the
select number of hours in timer operation.
42 Operating mode indication
(MODE)
Indicates the selected operating mode.
AUTO
T-ON T-OFF
COOL
DRY
FAN
HEAT
SWING
SLEEP
LOCK
SPEED
MODE
FAN SWING
ON/OFF
SLEEP TIMER
°F
OPER
AUTO
°C
AUTO
T-ON T-OFF
COOL
DRY
FAN
HEAT
SWING
SLEEP
LOCK
SPEED
°F
OPER
AUTO
°C
24
25
26
27
28
36
37
38
39 40 41
42
33 34 35
29
30
31
32