12
EN
Ozone generator Airozon® 28 ECO
Replacing the ozone plate
If the ozone plate (
22
) is defective, it has to be replaced.
Please proceed as follows to replace the ozone plate (
22
):
1. Loosen the screws at the housing (
2
) of the device and
remove the housing.
2. Pull out the ozone plate (
22
) from the ozone generator (
23
)
and dispose of the ozone plate properly.
22
23
3. Remove the heat-conducting paste that is applied on the
refrigeration unit (
24
).
24
4. Apply new heat-conducting paste on the refrigeration
unit (
24
).
5. Insert the new ozone plate (
22
) and slightly press it onto
the cooling plate (
24
).
6. Screw the housing (
2
) back on the ozone generator and
firmly retighten the screws.
Technical annex
Technical data
Parameter
Value
Model
Airozon
®
28 ECO
Electric connection
110–120 V, 6 A, 50/60 Hz or
220–240 V, 3 A, 50/60 Hz
Frequency
50 Hz
Max. nominal current
1.5 A
Max. power input
350 W
Ozone output
7000 mg/h, 14000 mg/h,
21000 mg/h, 28000 mg/h
Air flow rate
288 m³/h
Sound pressure level (at a
distance of 3 m)
55 dB(A)
Dimensions
(depth x width x height)
440 x 280 x 340 mm
Weight
6.3 kg
Minimum distance to walls and
other objects:
top (A):
rear (B):
sides (C):
front (D):
50 cm
50 cm
50 cm
50 cm
