EN
9
dehumidifier TTK 165 ECO / TTK 170 ECO / TTK 380 ECO
Mounting the wheels TTK 165 ECO / TTK 170 ECO
Prior to initial start-up, the wheels and the axle must be
attached to the device. To do so, please proceed as follows:
ü
The device is placed on its front side.
1. Use two large screws to fasten the axle (14) to the rear
bottom side of the device. Ensure tight fit.
14
2. Insert a standard split pin (15) into the inner hole of the
axle up to the stop. Bend the end of the split pin outwards
to fix the split pin.
15
3. Place a washer (16) on the axle (14).
4. Place a wheel (7) in front of the washer (16).
5. Place a second washer (16) in front of the wheel (7).
7
14
16
16
6. Insert a linchpin (17) into the hole in front of the
washer (16) up to the stop. Turn over the ring of the
linchpin (17).
17
17
16
7. Repeat this process on the other side of the axle.
8. After mounting the wheels and the feet, place the device in
an upright position.
