12
EN
dehumidifier TTK 165 ECO / TTK 170 ECO / TTK 380 ECO
Switching the device on
Once you have completely installed the device as described in
the chapter Assembly and start-up, you can switch it on.
Press the on/off switch (10). The device starts to dehumidify in
continuous operation.
Note
Only use the device in an upright position, otherwise
the compressor could be damaged.
Memory function
After a power failure during operation the device will switch
back on.
Auto stop function
If the condensation tank is full or not inserted correctly, the
device will stop automatically.
Operating hours counter
The devices TTK 170 ECO and TTK 380 ECO are equipped with
an operating hours counter (12). The hour display has five digits.
Operation with hose attached to the condensation
connection
TTK 165 ECO / TTK 170 ECO
For continuous operation or unattended dehumidification, please
connect a suitable condensation drain hose to the device.
ü
A suitable hose (diameter: 12 mm) is ready for use.
ü
The device is switched off.
1. Open the front cover.
2. Remove the condensation tank.
3. Guide the condensation drain hose through the hole in the
device's bottom panel.
4. Push one end of the hose onto the hose connection at the
condensation tank.
