6
EN
air cleaner TAC 750 E
Assembly and start-up
Scope of delivery
•
1 x Device
•
1 x Manual
Unpacking the device
1. Open the cardboard box and take the device out.
2. Completely remove the packaging.
3. Fully unwind the power cable. Make sure that the power
cable is not damaged and that you do not damage it during
unwinding.
Assembly
Inserting the filters
Info
The filters are not included in the scope of delivery!
Choose the filters according to the area of application
from our filter range. Insert the selected filters prior to
initial start-up.
Prior to start-up the filter chain of the device must be configured
according to the desired field of application.
1. Open the tension locks (2) on both sides of the device.
2. Remove the front cover (3).
2
3
3. For all filter installations always observe the correct flow
direction according to the direction of the air current (air
flow direction: from back to front)!
4. If installed, remove the coarse or fine filters (9, 10, 11)
from the device.
9, 10, 11
5. Loosen the knurled screws (13) and remove the filter
frame (14) from the device.
13
13
14
