7. REMOTE SETTING
INSTALLATION IS COMPLETE
Follow the separate instructions enclosed with the remote control.
This fan model has an optional integrated dimmable LED array;
Use the "D" dimming setting for the Light Function Select Switch.
7. Setting the Remote Control
Rotate cover clockwise to secure
it to motor assembly.
Bent
Tab
Groove
6B. Installing the Non-Light Cover
Lift light cover to
motor aligning the
opening of the
grooves to the bent
tabs on motor plate.
If you are not installing the light...
6B. NON-LIGHT COVER INSTALLATION
5. Removing the LED Light Pan
Remove the three screws holding
the clear cover to the LED array.
Unplug the wire connector from the LED array.
Remove the three screws holding
the Light Pan to the motor plate.
Remove Light Pan
If you are not installing the light, The LED Light Pan must be removed
Motor
Plate
Light Pan
Screws x3
Light
Pan
Unplug
Connector
Clear
Cover
Screws
x3
Clear Cover
6A. OPTIONAL NO LIGHT DIS-ASSEMBLY
