1. HANGING SYSTEM INSTALLATION
Install mounting bracket to outlet box in ceiling
by using screws included with the outlet box
and washers from the hardware bag.
1A. Installing mounting bracket to ceiling outlet box
Fan
Assembly
Mounting
Bracket
Mounting
Bracket
Ridge
Ball Groove
1C. Hanging the fan
Lift fan assembly onto the mounting bracket.
Rotate the fan so that the groove on the ball
engages the ridge on the mounting bracket.
1B. Installing Downrod and Yoke
Downrod Jam
Screw (2)
(Tighten)
Cotter Pin
Cross Pin
Yoke
Wires
D
o
w
n
ro
d
A
s
s
e
m
b
ly
Downrod Jam
Screw (2)
(Loosen)
Yoke
Remove cross pin, washer and cotter pin from downrod.
Insert downrod through canopy and yoke cover, and feed motor wires through downrod.
Loosen 2 downrod jam screws at yoke. Insert downrod assembly into yoke.
Insert the cross pin through yoke & downrod and secure with washer and cotter pin.
Tighten both downrod jam screws to further secure downrod.
Place motor right side up onto styrofoam packing
Downrod
Cotter Pin
Cross Pin
Canopy
Washer
Yoke Cover
Outlet Box
Mounting
Bracket
Note: Do not squeeze all the wires while
inserting the receiver into the mounting bracket.
2A. Insert receiver into mounting bracket
Follow separate instructions enclosed with the remote control.
2B. Making electrical wire connections
2. WIRING CONNECTION
Receiver
Mounting
Bracket
