P3
OFF OFF OFF
Turn off power at breaker
box to avoid possible
electrical shock.
Use metal outlet box suitable
for fan support.
Outlet box must support 35 lbs min.
WARNING: blades should be at least 7 feet from floor
CAUTION:
Do not fold blades with heavy
pressure from two sides.
It may cause blades to crack.
Note 1:
Note 2:
Note 3:
1A.Installing mounting bracket to ceiling outlet box
1. HANGING SYSTEM INSTALLATION
1C.
Hanging the fan
Rotate fan so that the groove on the ball engages
the ridge in the mounting bracket.
Lift fan assembly onto mounting bracket.
Mounting
Bracket
Cross Pin
Cotter Pin
1
Fan Assembly
Blade
Canopy
Yoke cover
Downrod
Outlet Box
Mounting
Bracket
Mounting
Bracket
Ridge
Ball Groove
1B.
Downrod and Yoke
Installing
Remove cross pin and cotter pin from downrod.
Insert downrod through canopy and yoke cover, and feed motor lead wires through downrod.
Loosen 2 downrod jam screws at yoke. Insert downrod assembly into yoke.
Insert the cross pin through yoke & downrod and secure with cotter pin.
Tighten both downrod jam screws to further secure downrod.
Pull down the yoke cover to cover yoke.
1
2
3
4
5
6
Wires
Yoke
Yoke cover
Cross Pin
Yoke
Cotter Pin
Downrod Jam
Screw(2)
(Tightening)
2
3
5
4
Downrod
Assembly
Downrod Jam
Screw(2)
(
ing)
Loosen
6
Install mounting bracket to outlet box in ceiling by using screws included with the outlet box and
washers from the hardware bag.
1
4
