4
Step 3 Cushion Attachment – 8’ x 8’ Party Lounger
WARNING:
Do not try to lift or move the Seat Cushion with only
one person. This component is heavy and awkward to handle, and
may result in injury to persons or damage to property if not lifted
properly.
Place Seat Cushion with Velcro Straps facing down onto your
assembled 8’ Square Party Lounger Frame. Be sure that the side
of the cushion (5 straps) is aligned with the side of the Sectional
Frame. See below illustration.
Engage Velcro Straps (18) to Frame Seating Grid Bracing, located
around the perimeter of your Square Party Lounger.
Cushion End Velcro Straps
Cushion Side
Velcro Straps
5
Step 4 Headrest Cushion Attachment (Optional) – 8’ x 8’
Align your Headrest Cushion (Optional) at the desired end of your
Square Party Lounger on top of the Cushion. Wrap the Velcro
Straps around the side Cushion and underneath the Seating Grid
of the Square Party Lounger Frame, both sides. See below
illustration.
Engage the Velcro Straps at the center and underside of the
Seating Grid of your Square Party Lounger.
Headrest Cushion (Optional)
8’ x 8’ Party Lounger with (Optional) Headrest Cushion
